Using Room EQ Wizard with DRC Room Correction

Using Room EQ Wizard with DRC Room Correction

DRC is an excellent free room correction suite by Denis Sbragion. I wanted a slightly more streamlined method of using DRC with software I am…

Read Article →
High Efficiency Speaker Project – Part 3

High Efficiency Speaker Project – Part 3

It has taken a while but the project is now finished. The final result is as described in the previous articles with the exception of…

Read Article →
Pass Aleph 5 Clone

Pass Aleph 5 Clone

The Aleph 5 is a 60wpc single ended class A amplifier. This set was purchased as an incomplete project so there isn’t much to say…

Read Article →
How to display Dynamic Range rating in Foobar2000

How to display Dynamic Range rating in Foobar2000

Download and install the DR component from here http://dr.loudness-war.info/downloads/foo_dynamic_range_1.1.1.zip In foobars advanced settings under tools-dynamic range meter, tick write DR meta data tags In preferences…

Read Article →
PC Based Digital Active Crossovers Using a low cost HDMI Receiver.

PC Based Digital Active Crossovers Using a low cost HDMI Receiver.

Something I have wanted to experiment with for some time is active crossovers. Initially I was put off by the cost especially since I wasn’t…

Read Article →
High Efficiency Speaker Project - Part 2

High Efficiency Speaker Project – Part 2

Crossovers. Recently I have been experimenting with pc based crossovers. The basic concept for this is the following chain: PC->HDMI->Home Theatre Receiver->7.1 pre outs->Amplifiers PC:…

Read Article →
KEF 105 Measurements.

KEF 105 Measurements.

For my speaker measurements I use a Dayton EMM-6 Microphone and a Tascam US-144MK2. I use Room EQ Wizard and ARTA. These were all done…

Read Article →
Digital RIAA Equalization

Digital RIAA Equalization

This is something I have been experimenting with. It sounds pretty good. Hardware: I have been using a Tascam US-144MkII. The turntable is connected into…

Read Article →
KEF 105 Recap

KEF 105 Recap

Things have changed for me in recent months. I have moved back to the UK and no longer have access to the machine shop so…

Read Article →